Georgetown · Walk-in Closets
Custom Walk-in Closets in Georgetown, DC
Georgetown was not designed with walk-in closets — Pannello draws them anyway.
Georgetown · Quick facts
- Drive from showroom
- 8 minutes
- Lead time
- 3 to 5 weeks
- Service area
- Washington DC
Federal rowhouses were not designed with walk-in closets. The master bedroom in a Georgetown rowhouse is typically a rectangle — 12 by 14, 14 by 16 — with a pair of built-in reach-in closets behind flush panel doors. Converting an adjacent bedroom into a dedicated walk-in, or carving a dedicated dressing room from a wide landing, is one of the most common closet projects Pannello draws in Georgetown.
The constraint that limits most closet companies in Georgetown — getting wardrobe panels through a narrow stair turn — does not apply to Pannello panel-by-panel delivery. Panels ship in pieces sized to the stair turn (which we measure during the field visit) and assemble on site. Floor-to-ceiling wardrobe runs go in the same way our Georgetown kitchen cabinets do: panels up the stairs, assembly in the room.
Wood veneer in oak, walnut, or ash, or matte lacquer in any RAL color. Center island where the converted room is large enough to support one. Motion-activated LED throughout. 3 to 5 week fabrication from final shop drawing approval.
What's included
How we approach Walk-in Closets in Georgetown.
Center island
Drawer storage below, jewelry tray above, folding surface on top.
Full-length mirror integration
Built into the wardrobe run or pivot-mounted.
Velvet jewelry inserts
Custom-fit to the drawer.
Motion-activated LED
Wardrobe interiors light when doors open.
Bench or ottoman
Built-in seating where the room supports it.
Why Pannello
A walk-in, drawn as a room
We start by drawing the room — door swings, mirror placement, island position, sightlines from the bedroom. Then we lay out hanging, drawers, and shoe storage to match the way you actually dress.
Georgetown questions
Common questions about Walk-in Closets in Georgetown.
Can Pannello convert a Georgetown bedroom into a walk-in closet?
Yes — we draw the conversion as a complete room: doorway treatment, wardrobe layout, lighting plan, and floor protection during install. The stair turn is measured during the field visit and panels are sized to it during design.
How do you get wardrobe panels into a Georgetown rowhouse with a tight stair?
Panels are sized to the stair turn during the design phase — the stair is measured before we draw anything. Panels ship as flat boards, not as assembled boxes, so the turn is never a limiting factor.
Is a converted Georgetown bedroom large enough for a center island?
Generally yes if the bedroom was 11 by 12 feet or larger. An island needs at least 36 inches of clearance on every accessible side. We map this on the floor plan during the field measure and show you the layout before any fabrication decision is made.
Explore further
Service
Walk-in Closets
Designer-led walk-in closets with islands, seating, and full wardrobe runs.
Neighborhood
Georgetown, Washington DC
A Georgetown kitchen is rarely a rectangle. The houses west of Wisconsin Avenue and along O Street w…
Next step
Schedule a Design Consultation
90 minutes in our Georgetown showroom. No quote until we have drawn your room.
Talk through your Georgetown project.
We know Georgetown architecture, building constraints, and the designers who work here. Tell us about the room.
- 3 to 5 week fabrication lead time
- In-house installation — no subcontractors
- European-engineered construction, E1-rated materials
No pressure, no quote up front
Walk-in Closets Consultation — Georgetown
90 minutes in our DC showroom. We will walk material samples, talk through your project, and outline next steps.
Talk through your walk-in closets in georgetown project
90 minutes. DC showroom. No quote until we draw it.